top of page
Screen-Shot-2020-02-11-at-1.58.14-PM.png

polyFIBRO® thermo-polymer coating is long lasting and does not chip, peel or crack like traditional gel-coat and paint finishes. polyFIBRO® is the line of aquatic fiberglass coating swimming pools that will transform your pool or spa into a high end super low maintenance focal point.

Our coatings virtually eliminate all of the problems of traditional plaster, fiberglass, and painted surfaces. They can be applied to new or remodel pool surfaces to provide a beautiful, long-lasting finish that will not mottle, crack, chalk, peel, or blister.

 

They are available in a variety of different colors, and all are chemical, stain, and fade resistant. 

Big-pool-empty-before-sanding.jpg

BEFORE

LEnov-434-HDR.jpg

AFTER

IMG_3917.JPG

Will Not Blister

New high gloss and multi-dimensional gel-coats are only able to be installed in new factory fiberglass pools. There is no ability to repair a pool damaged during installation, transport, or every day usage. polyFIBRO® swimming pools and finishes are easily repairable unlike existing coatings.

Fiberglass Steps

polyFIBRO® is the ideal product for refinishing fiberglass steps. You are now able to breathe new life in to your tired and worn insert steps, and match or accent your liner pools color.

Slip Resistant 

Any aquatic area with high traffic such as slide entrances, zero-entry and wading pools can safely have aquaBRIGHT™ and polyFIBRO applied to them. Our slip resistant application process for aquaBRIGHT™ and polyFIBRO® is an ideal for surfaces such as steps, benches, and beach entries to assist in the prevention of accidents at ingress or egress points in a pool. 

601735e8d37c8d0021ca242a_optimized_edited.jpg
quv exposure.jpg

The photo shows two samples of EcoFinish™ aquaBRIGHT™ Pool Finish. The sample on the left was exposed to 3000 hours of QUV testing while the other sample was literally kept in the dark as a comparative standard.

The result of the 3000 hour test revealed no visual indication of color change or gloss loss from the damaging effects of UV exposure

Pick A Color, Any Color

Re-Gel coating a pool limits you to light colors: white, baby-blue, tan, light grey etc…polyFIBRO® can be applied in any color you choose from our standard ecoFINISH® 

Pacific-Blue.jpg

Pacific Blue

black absinthe.jpg

Black Absinthe

Ice-Ice-Bay-Bay.jpg

Ice Ice Bay Bay

Sandy-Beach-Swatch-1.png

Sandy Beach

marrakesh.jpg

Marrakesh

GialloVersilia.jpg

Giallo Versilia

Santorini.jpg

Santorini

CaboVerde.jpg

Cabo Verde

bottom of page